View DO1605T-152ML_4593468.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Document 253-1
SMT Power Inductors - DO1605T Series
* Only 1.8 mm high * Handles current up to 2.3 Amps rms
Designer's Kit C353 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 101 - 110 mg Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7reel; 3500/13 reel Plastic tape: 12 mm wide, 0.25 mm thick, 8 mm pocket spacing, 2.3 mm pocket depth PCB washing Only pure water or alcohol recommended
12 L 20% (H)
1
Part number1
DCR max (Ohms) 0.04 0.06 0.07 0.12 0.15 0.20 0.23 0.27 0.35 0.54 0.74 1.1 1.6 2.3 3.5 5.7 8.2 10.8 17.2 22.6
SRF3 ref (MHz) 230 180 140 110 100 80 70 60 45 35 30 22 20 15 10 9 8 7 5 4
1. When ordering, please specify termination and packaging codes:
Isat4 (A) 2.5 2.2 1.8 1.4 1.2 1.1 1.0 1.0 0.8 0.6 0.5 0.45 0.35 0.30 0.25 0.20 0.16 0.14 0.12 0.08
Irms5 (A) 2.3 2.1 1.7 1.3 1.1 1.0 0.95 0.90 0.70 0.50 0.45 0.40 0.35 0.30 0.25 0.18 0.16 0.12 0.10 0.08
DO1605T-102ML_ DO1605T-152ML_ DO1605T-222ML_ DO1605T-332ML_ DO1605T-472ML_ DO1605T-682ML_ DO1605T-822ML_ DO1605T-103ML_ DO1605T-153ML_ DO1605T-223ML_ DO1605T-333ML_ DO1605T-473ML_ DO1605T-683ML_ DO1605T-104ML_ DO1605T-154ML_ DO1605T-224ML_ DO1605T-334ML_ DO1605T-474ML_ DO1605T-684ML_ DO1605T-105ML_
1.0 1.5 2.2 3.3 4.7 6.8 8.2 10 15 22 33 47 68 100 150 220 330 470 680 1000
DO1605T-105MLC Termination: L = RoHS compliant silver-palladium-platinum-glass frit Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C= 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B= Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D= 13 machine-ready reel. EIA-481 embossed plastic tape (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms. 3. SRF >13 MHz measured using Agilent/HP 8753D network analyzer; <13 MHz using Agilent/HP 4192A. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Current that causes a 40C temperature rise from 25C ambient. 6. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering.
Specifications subject to change without notice. Please check our website for latest information.
Document 253-1
Revised 10/08/08
(c) Coilcraft, Inc. 2009
Document 253-2
SMT Power Inductors - DO1605T Series
Typical L vs Frequency
10000
Typical L vs Current
10000
1000 H
1000
1000
1000 H
Inductance (H)
100 H
Inductance (H)
100
100 H
100
10 H
10
10
10 H
1
1 H
1 H
1
0.1 0.01 0.1 1 10
0.1 0.01 0.1 1 10
Frequency (MHz)
Current (A)
120 110 100
XXXX
0.216 max 5,5
Irms Derating
Internal code Dash number
Percent of rated Irms
90 80 70 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 120 140
0.071max 1,8
Recommended Land Pattern
0.039 1,0
25C
0.165 max 4,2
0.173 4,4
Ambient temperature (C)
0.148 3,76
0.029 0,74
0.187 4,76
Dimensions are in
inches mm
Specifications subject to change without notice. Please check our website for latest information.
Document 253-2
Revised 10/08/08
(c) Coilcraft, Inc. 2009

▲Up To Search▲

Price & Availability of DO1605T-152ML

	To Download DO1605T-152ML Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .